Snmp; Show Snmp Agent - Hitachi Compute Blade 500 Series User Manual

Comment
If you execute this command after the digital certificate signed by the CA has
been imported, the imported digital certificate will be discarded and the self-
signed certificate becomes valid. To return to using the digital certificate
signed by the CA, create the CSR again.
If the digital certificate signed by the CA has not been imported and the
management LAN IP (IPv4) address for the management module is changed,
a self-signed certificate will be automatically generated. When this command
is executed, the self-signed certificate will be automatically generated using
the signature hash algorithm specified in the command.
When the security strength is set to high, SHA cannot be specified as the
signature hash algorithm.

SNMP

show snmp agent

Command
show snmp agent
Description
Shows the setting of SNMP agent.
Role
Chassis
Parameters
None
Show items
-- SNMP agent setting --
Agent
Enabled or disabled of SNMP agent.
Contact name
Contact name of SNMP agent.
Enable : Enabled
Disable : Disabled
Maximum of 60 characters.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-267