Hitachi Compute Blade 500 Series User Manual page 31

Slot number of the server blade in the server chassis Range is from 0 to
7.
WWN type
Type of WWN
default: Default Physical WWN
optional: Optional Physical WWN
Card
Type of card
Mezzanine
Onboard LAN
Num
Slot number of card
Mezzanine: 1 to 4.
Onboard LAN: 1 to 2
Port
Port number of card
World wide port name
WWPN
XX:XX:XX:XX:XX:XX:XX:XX : Default Physical WWN
World wide node name
WWNN
XX:XX:XX:XX:XX:XX:XX:XX : Default Physical WWN
Message
When you specify -p parameter and a non-primary server blade in SMP
configuration, the following message appears without showing WWN.
E0640 : <Blade %1$d> Command was canceled. Specified blade is not the
primary blade of SMP.
Example
[Displays Default Physical WWN which the card installed on server blade 0 is
using. ]
$ show wwn original -b 0
-- Original WWN List --
Slot
Card Num Port World wide port name
name
----------- --- ---- ------------------------
------------------------
mezzanine 2
Hitachi Compute Blade 500 Series CLI Console User's Guide
: 0
0 50:00:08:70:00:5b:e1:50
CLI command
World wide node
2-13