Hitachi Compute Blade 500 Series User Manual page 139

Parameters
-i <ip_addr>
IP address
-s <subnet_mask>
Subnetmask
-g <default_gateway>
Default gateway of the management module
-d0 <dns>
The address of DNS server (1st)
-d1 <dns>
The address of DNS server (2nd)
-d2 <dns>
The address of DNS server (3rd)
-F
Executes the command without inquiry.
Show items
None
Message
If all parameters are omitted, the setting fails.
Example
[Sets management LAN of management module.]
$ set mgmt-module mgmt-lan -i 192.168.0.20 -s 255.255.255.0 -g
192.168.0.70 -F
I0001 : Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
Only the settings for IPv4 DNS servers are updated. Settings for IPv6 DNS
servers and settings regarding whether to prioritize the DNS server for IPv4
addresses or the DNS server for IPv6 addresses are not updated.
To configure DNS settings, use the command set mgmt-module dns.
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-121