Show Chassis Usb Validity - Hitachi Compute Blade 500 Series User Manual

Executes the command without inquiry.
Show items
None
Message
None
Example
[Disables USB port 1]
$ set chassis usb validity -p 1 -v disable
Confirm? (y/[n]):y
I0001 : Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
If you connect a USB device to a USB port that is set to "disable" and then
change the USB port setting from "disable" to "enable", it takes several
seconds for the USB device to be recognized. During this time, if you select
the [USB Device:] tab in the Web console, the connection status is displayed
as [Not Connected]. If this happens, click the [Refresh] button.
If you want to disable the USB port, remove the USB device from the port
before setting the port to "disable".
If you connect the LCD touch console while the USB port is disabled, the
screen displays "Please wait..." and then freezes. Furthermore, you cannot
use the LCD touch panel to perform import, collect the dump log, or update
the firmware of the management module or server blade.

show chassis usb validity

Command
show chassis usb validity
Description
Displays whether USB ports on the front panel are enabled or disabled.
Role
Chassis
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-19