Hitachi Compute Blade 500 Series User Manual page 118

You can set the authentication information in the management module while
installing other switch module or no installing a switch module, however, the
configured information is not used.
Role
Switch module authority
Parameters
<sw_no>
Slot number of the switch module in the server chassis
-i <sw_login_id>
Login ID of the LAN switch module
16 characters maximum
Cannot be omitted
-p <sw_login_passwd>
Login password of the LAN switch module
128 characters maximum
When login the LAN switch module while omitting, you can execute
without login password
-a < sw_admin_passwd>
Administrator password of the LAN switch module
128 characters maximum
When login the LAN switch module while omitting, you can execute
without administrator password
-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[When logging in the switch module 0; the login ID is "user01", the login
password is "pass01", and the administrator password is "adminpass"]
$ set sw-module lansw authentication 0 -i user01 -p pass01 -a
adminpass -F
I0052 : <Switch module 0> Setting was completed.
2-100
Range is from 0 to 3.
Only one module can be selected.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide