Hitachi Compute Blade 500 Series User Manual page 45

original : Default Physical
additional : Optional Physical
In SMP configuration, when you specify a non-primary server blade,
the setting value is shown in parentheses and will not affect the non-
primary server blade operation.
MAC type
Type of MAC address.
original : Default Physical
additional : Optional Physical
In SMP configuration, when you specify a non-primary server blade,
the setting value is shown in parentheses and will not affect the non-
primary server blade operation.
--- OS mode --
OS mode
Logical Partitioning.
basic : Logical Partitioning is disabled.
hvm : Logical Partitioning is enabled.
In SMP configuration, when you specify a non-primary server blade,
the setting value is shown in parentheses and will not affect the non-
primary server blade operation.
Message
None
Example
[Shows the setting of server blade 0.]
$ show blade setting 0
-- Blade setting --
Slot
-- Blade AC recovery setting --
AC recovery
Wait time(min)
-- Blade pre-configure setting --
N+M
WWN type
MAC type
-- OS mode --
OS mode
S0002
S0000
$
[Shows the primary server blade setting in SMP configuration.]
$ show blade setting 2
-- Blade setting --
Hitachi Compute Blade 500 Series CLI Console User's Guide
: 0
: stay
: 10
: enable
: additional
: additional
: basic
: Command succeeded.
: Command was finished.
CLI command
2-27