Hitachi Compute Blade 500 Series User Manual page 103

Parameters
<blade_no>
Slot number of the server blade in the server chassis
Range is from 0 to 7.
You cannot specify multiple values.
-a <account_no>
BMC User account number
Range is from 1 to 4.
You cannot specify multiple values.
-u <account_use>
Enabled or disabled BMC user account
enable : Enabled.
disable : Disabled.
If this is omitted, the value of the setting for enabling or disabling the
account does not change.
You cannot disable BMC user account number 1.
-n <user_name>
User name
You can enter a character string of 1 to 16 characters. The string can
contain alphanumeric characters and the following characters: . _ $ -
= + * % ? @ / \ ' ! ~ ; ^ ( ) [ ] { } | , `. You cannot use the symbols
<, >, &, #, ", or space characters.
The first character must be an alphanumeric character.
If this is omitted, the user name does not change.
If the user name is the same as the another BMC user account, the
user name cannot be registered. If the user name is the same as the
IPMI user account, the user name cannot be registered.
-p <password>
Password
You can enter a character string of 1 to 20 characters. The string can
contain alphanumeric characters and the following characters: . _ $ -
= + * % ? : @ / \ ' ! ~ ; ^ ( ) [ ] { } | , `. You cannot use the
symbols <, >, &, #, ", or space characters.
If this is omitted, the password does not change.
-F
Executes the command without inquiry.
Show items
None
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-85