Clear Blade Hvm - Hitachi Compute Blade 500 Series User Manual

Comment
When you specify a non-primary server blade in SMP configuration, the
following message appears without resetting the server blade.
E0640 : <Blade %1$d> Command was canceled. Specified blade is not the
primary blade of SMP.

clear blade hvm

Command
clear blade hvm [<blade_no>] [-F]
Description
Clears the configuration of LP.
In SMP configuration, specify the primary server blade to initialize LP settings
used on all server blades in the configuration. When you specify a non-
primary server blade, initialization is executed without affecting the non-
primary server blade operation.
Role
Server Blade
Parameters
<blade_no>
Slot number of server blade in the server chassis
-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[Clears the configuration LP setting of server blade 0.]
2-60
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide