Set Security Tls Mgmt-Module - Hitachi Compute Blade 500 Series User Manual

I0037 : <Blade 7> Setting was completed.
I0067 : <Management module> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
Executing this command for setting the management module security
strength will restart the management module to disconnect the session.
Setting the management module security strength to high makes SSL/TLS
versions have the following values.
TLS 1.2: enable
TLS 1.1: disable
TLS 1.0: disable
SSL 3.0: disable
Setting the management module security strength to default makes SSL/TLS
versions have the following values.
TLS 1.2: enable
TLS 1.1: enable
TLS 1.0: enable
SSL 3.0: enable

set security tls mgmt-module

Command
set security tls mgmt-module -v <tls_version> [-F]
Description
Enables or disables SSL/TLS versions for a management module. Specify
versions to enable among TLS 1.2, TLS 1.1, TLS 1.0, and SSL 3.0 with the
parameter. If omitted, those SSL/TLS versions are disabled.
Role
Chassis
Parameters
-v <tls_version>
SSL/TLS version
Enables SSL/TLS versions specified. Versions not specified are disabled.
Specify versions using the following strings.
1.2: TLS 1.2
1.1: TLS 1.1
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-327