Test Sw-Module Lansw Authentication - Hitachi Compute Blade 500 Series User Manual

Show items
None
Message
None
Example
[Delete the authentication setting for logging in the switch module 0.]
$ delete sw-module lansw authentication 0 -F
I0052 : <Switch module 0> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

test sw-module lansw authentication

Command
test sw-module lansw authentication <sw_no> [-F]
Description
Confirm that logging in the LAN switch module is enabled or not. Confirm that
the authentication information that is set using "set sw-module lansw
authentication" command.
The target LAN switch modules are as follows:
• 1 Gb/sec LAN switch module (40-port)
• 1 Gb/sec LAN switch module (20-port)
• 1/10 Gb/sec LAN switch module
Role
Switch module authority
Parameters
<sw_no>
Slot number of the switch module in the server chassis
-F
2-102
Range is from 0 to 3.
Only one module can be selected.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide