Update Blade Firmware Bulk - Hitachi Compute Blade 500 Series User Manual

update blade firmware bulk

Command
update blade firmware bulk [<blade_no>] -f <fw_file_name> [-F]
Description
Updates the firmware of server blade.
In SMP configuration, you need to update firmware on all server blades
simultaneously. So, specify all server blades in the configuration.
Role
Server Blade
Parameters
<blade_no>
Slot number of the server blade in the server chassis.
-f <fw_file_name>
File name of firmware
-F
Command executes without the inquiry.
Show items
None
Message
None
Example
[Updates firmware of server blade 0.]
$ update blade firmware bulk 0 -f xxx.update
W0012 : BMC restart automatically.
W0013 : New EFI firmware will be used the next time EFI is
booted.
Confirm? (y/[n]):y
2-64
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
File must be in the user's directory of management module.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide