Set User Ldap Group - Hitachi Compute Blade 500 Series User Manual

set user ldap group

Command
set user ldap group [-a <group_auth>] [-m <ldap_member_attr>] [-
g0 <ldap_group_dn>] [-r0 <group_role>] [-g1 <ldap_group_dn>] [-r1
<group_role>] [-g2 <ldap_group_dn>] [-r2 <group_role>] [-g3
<ldap_group_dn>] [-r3 <group_role>] [-g4 <ldap_group_dn>] [-r4
<group_role>] [-dg <dynamic_dn>] [-df <dynamic_filter>] [-dr
<dynamic_role>] [-F]
Description
Set the LDAP group authentication.
The setting of the item which omits the parameter is not to be changed.
Role
Account
Parameters
-a <group_auth>
Authentication method
-m <ldap_member_attr>
Attribute of the member of group
-g0 <ldap_group_dn>
DN of group which permits login (1st piece)
-r0 <group_role>
Role of the group DN (1st)
2-160
none : Group authentication is not performed.
static : Static group
dynamic : Dynamic group
1 character or more, 64 characters or less ASCII character.
Space cannot be used for head and last.
1st character of character type which can be used is alphanumeric
character ([0-9] [A-Z] [a-z]) alphabetic character ([A-Z] [a-z]) and
after 2nd character.
1 character or more, 256 characters or less ASCII character.
Space cannot be used for head and last.
The DN of group concerned is deleted when specify only space.
user-entry : The user entry role is used.
role name : A role whose name is registered in the management
module is used.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide