Set Mgmt-Module Serial-Port - Hitachi Compute Blade 500 Series User Manual

Message
None
Example
[Shows the setting of serial console.]
$ show mgmt-module serial-port
-- Serial console setting --
Baud rate(bps)
Serial console
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

set mgmt-module serial-port

Command
set mgmt-module serial-port [-b <baud_rate>] [-d <serial_dest>]
[-F]
Description
Edits the setting of serial console.
Role
Chassis
Parameters
-b <baud_rate>
Baud rate of serial console.
-d <serial_dest>
Destination of serial console.
-F
2-124
9600, 19200, 38400, 57600, 115200
mgmt : Management module.
sw0 : Switch module of slot 0.
sw1 : Switch module of slot 1.
sw2 : Switch module of slot 2.
sw3 : Switch module of slot 3.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
: 9600
: mgmt