Message
None
Example
[LP is started in the server blade 0.]
$ set blade os-mode 0 -m hvm
Confirm? (y/[n]):y
I0037 : <Blade 0> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
[LP is not started in the server blade 1.]
$ set blade os-mode 1 -m basic
Confirm? (y/[n]):y
I0037 : <Blade 1> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
When you specify a non-primary server blade, the setting will not affect the
server blade operation. The following message appears to warn you.
W0031 : <Blade X> Set data is not used. Specified blade is not the primary
blade of SMP. (X: a server blade you specified)
show blade hardware
Command
show blade hardware [<blade_no>] [-h] [-f] [-s]
Description
Shows the following information of server blade hardware.
•
Hardware
•
FRU
•
Sensors
The following table describes types of information and displayed items.
•
Hardware information
When -h parameter is specified:
Server blade hardware
2-70
Type of information
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
Items
Product name
Model name