Hitachi Compute Blade 500 Series User Manual page 124

Description
Displays the following hardware information for switch modules:
1 Hardware information
.
2 FRU information
.
3 Sensor information
.
The displayed information is as follows.
1 Hardware information
.
This is displayed when the -h parameter is specified.
¢
¢
¢
¢
2 FRU information
.
This is displayed when the -f parameter is specified.
¢
¢
¢
¢
¢
¢
¢
3 Sensor information
.
This is displayed when the -s parameter is specified.
This displays sensors that can be obtained based on the switch type.
¢
¢
¢
You must specify at least one option (-h, -f, or -s). If you do not specify an
option, information about switch modules will not be displayed. You can
specify all options. For each switch module, the information displayed when
the parameters are specified appears in the following order: hardware
information, FRU information, and sensor information.
You can specify more than one switch module number. If you do not specify a
switch module number, information about all switch modules is displayed.
Role
Switch module privilege
2-106
Product name
Model name
Serial number
Rated power (W)
Module Type Name
Module Serial Number
Module Type Name for maintenance
Module type 1
Module type 2
Compatibility Information
Power Consumption
Temperature sensor
Voltage sensor
Electric current sensor
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide