Restore Blade Fc-Hba - Hitachi Compute Blade 500 Series User Manual

Example
[Back up data of HBA on the mezzanine card number 2 of server blade 2.]
$ backup blade fc-hba 2 -m 2 -n 0 -f fchba.backup
Confirm? (y/[n]):y
I0041 : <Blade 2> Backup was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

restore blade fc-hba

Command
restore blade fc-hba <blade_no> -m <mezzanine_no> -n <bank_no> [-
F]
Description
Restore is available when Hitachi fibre channel mezzanine card is installed.
Restores Hitachi fibre channel mezzanine card settings to the mezzanine card
on a server blade from the backup file stored in the management module.
When the number of a bank, on which a backup file is stored, is specified, the
backup file of the generation is restored.
Restores settings for Hitachi fibre channel mezzanine card installed in a
specified server blade regardless of whether the server blade is in SMP
configuration or not.
Role
Server blade
Parameters
<blade_no>
Slot number of server blade in the server chassis.
-m <mezzanine_no>
Slot number of mezzanine on server blade.
-n <bank_no>
2-310
Range is from 0 to 7.
Multiple selection is not available.
Range is from 1 to 4.
Multiple selection is not available.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide