Set Blade Mgmt-V6 Address - Hitachi Compute Blade 500 Series User Manual

Comment
None

set blade mgmt-v6 address

Command
set blade mgmt-v6 address <blade_no> -st <setting> [-i
<ip_address>] [-p <prefix_len>] [-gs <dgw_setting>] [-g
<default_gateway>] [-F]
Description
Sets the management LAN (IPv6) for the server blade.
You can set a static address. To set a static address, enter the following
items:
• IP address (IPv6)
• Prefix length
• Whether to enable use of the default gateway
• Default gateway
Role
Network privilege
Parameters
<blade_no>
Server blade number
You can specify a value from 0 to 7. You cannot specify multiple values.
-st <setting>
Specify whether to enable use of a static address.
¢
¢
-i <ip_address>
IP address (IPv6)
If you entered -st enable, this item is required. If you entered -st
disable or omitted -st, omit this parameter.
-p <prefix_len>
Prefix length
Specify a value from 1 to 128.
2-82
enable: Enabled.
disable: Disabled.
You cannot omit this parameter.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide