Set Mgmt-Module Mgmt-V6 Dad - Hitachi Compute Blade 500 Series User Manual

set mgmt-module mgmt-v6 dad

Command
set mgmt-module mgmt-v6 dad -s <setting> [-F]
Description
Sets whether to suppress IPv6 communication when duplicated link local
addresses of the management LAN of the management module are detected.
Link local address duplication detection is executed when the management
module starts and when the management module is switched.
Role
Network privilege
Parameters
-s <setting>
Specify whether to enable or disable IPv6 communication when duplicated
link local addresses are detected.
¢
¢
-F
Specify this parameter to execute the command without displaying a
confirmation dialog box. You can omit this parameter.
Show items
None
Message
None
Example
[To enable IPv6 communication suppression when duplicated link local
addresses are detected]
$ set mgmt-module mgmt-v6 dad -s enable
Confirm? (y/[n]):y
I0001 : Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None
enable: Suppress IPv6 communication.
disable: Do not suppress IPv6 communication.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-137