Hitachi Compute Blade 500 Series User Manual page 185

Status
Shows the account is enabled or disabled.
enable: the account user can log in.
disable: the account user cannot log in.
Role
Shows a Role name assigned to the account using up to 31 alphabetical
characters.
Language
Shows a language used when you log in with this account, which is
selected from English, Japanese, and Follows the system settings. When
English or Japanese is selected, the selected language is used regardless
of the system language. When Follows the system settings is selected, a
system language set in
used.
CLI prompt
Shows a method of prompt on the CLI console, $ (fixed) or chassis ID
(slot number for a management module)$.
$: fixed
Chassis ID(slot number)$
Shows chassis ID(slot number for a management module)$ without a
space at the end of chassis ID. The actual chassis ID and slot number
at that time are shown.
CLI Inactive Time (min): session timeout in minutes
Shows time in minutes for automatically logout due to no operation on
the CLI console. The session timeout ranges from 0 to 1440 minutes.
When 0 is specified, the session cannot be disconnected automatically.
Web console, however, is disconnected from a session after 30 minutes
passed regardless of this setting value.
0: Automatic logout is not performed.
1 to 1440: Time until a session timeout automatically end the session in
the inactive state.
-- Password information --
Password remaining days
Time until password expiration (number of days remaining)
Displays the number of days until the last day when the current
password can be used to log in.
0 to 365 : Number of days until the password expires. (0 indicates
that the password will expire at midnight.)
expired : The password has expired.
infinite : The password will not expire and can be used indefinitely.
----- : The account is disabled.
Change expired password
Hitachi Compute Blade 500 Series CLI Console User's Guide
set language system on page 2-151
CLI command
command is
2-167