Hitachi Compute Blade 500 Series User Manual page 342

Security strength
Security strength for server blades
Message
None
Example
[Shows the security strength and settings for TLS versions]
The following is an example of Server blade installation status and
security strength settings when the command has been actually executed.
Slot 0, 1: Full-wide server blade with security strength supported
Slot 2: Half-wide server blade without security strength supported
Slot 3: No server blade is installed.
Slot 4: Half-wide server blade without security strength supported
Slot 5: Half-wide server blade with security strength supported
Slot 6: Half-wide server blade with security strength supported
Slot 7: No server blade is installed.
$ show security setting
-- Management module security setting --
Security strength : high
TLS 1.2
TLS 1.1
TLS 1.0
SSL 3.0
-- Server blade security setting --
Slot
Security strength : high
-- Server blade security setting --
Slot
Security strength : high
-- Server blade security setting --
Slot
Security strength : high
-- Server blade security setting --
Slot
Security strength : high
-- Server blade security setting --
Slot
Security strength : high
-- Server blade security setting --
2-324
0 - 7: The security strength of installed server blades are supported
by BMC.
0 (not supported) - 7 (not supported): The security strength of
installed server blades are not supported by BMC.
0 (not installed) - 7 (not installed): No server blade is installed.
High
default
: enable
: disable
: disable
: disable
: 0
: 1 (not install)
: 2 (not supported)
: 3 (not install)
: 4 (not supported)
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide