Hitachi Compute Blade 500 Series User Manual page 211

-u0
VLAN connected with MGMT0 port as untagged port.
-u1
VLAN connected with MGMT1 port as untagged port.
-p <ext_port_no>
Management LAN port
0 : MGMT0 port.
1 : MGMT1 port.
-m
Management Module
-b <blade_no>
Slot number of the server blade in the server chassis
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this
parameter is
When "all" is specified or a number following -b is omitted, this
parameter is executed on all server blades.
You can specify all server blades regardless of whether the server
blade is in SMP configuration or not.
-s <sw_no>
Slot number of the switch module in the server chassis.
Range is from 0 to 3.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all switch modules.
-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[The setting VLAN ID = 2400 is added to the management LAN port 1, and
the management module and the switch module of the number 1 and the
number 2 are made to belong to it.]
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-193