Set Blade Led - Hitachi Compute Blade 500 Series User Manual

Power
Fail
Mass(kg)
-- LED status --
S0002 : Command succeeded.
S0000 : Command was finished.
$
[Shows the status of the larger slot number (an odd number) used for the
full-width blade]
$ show blade status 1
-- Blade status --
Slot
Initialize
Power detail
Power
Fail
Mass(kg) : 0
-- LED status --
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

set blade led

Command
set blade led [<blade_no>] -l <led_type> -t <led_on_off> [-F]
Description
Turns on or turn off the Identify LED of server blade.
Turns on or off the Identify LED of a specified server blade regardless of
whether the server blade is in SMP configuration or not.
Role
Server Blade
Parameters
<blade_no>
Slot number of server blade in the server chassis.
2-34
: -----
: -----
: 0
: 1
: -----
: -----
: -----
: -----
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide