Set Snmp Manager - Hitachi Compute Blade 500 Series User Manual

set snmp manager

Command
set snmp manager -n <snmp_mgr_num> [-s <snmp_version>] [-h
<snmp_mgr_host_name>] [-p <snmp_mgr_port>] [-c
<snmp_mgr_community_name>] [-u <snmp_mgr_user_name>] [-a
<snmp_mgr_access_type>] [-at <snmp_mgr_auth_type>] [-ap
<snmp_mgr_auth_password>] [-et <snmp_mgr_encrypt_type>] [-ep
<snmp_mgr_encrypt_password>] [-F]
Description
Edits the setting of SNMP manager.
Role
Chassis
Parameters
-n <snmp_mgr_num>
Number of SNMP manager.
-s <snmp_version>
Version of SNMP agent.
-h <snmp_mgr_host_name>
Domain name (FQDN) or IPv4/IPv6 address of SNMP manager
-p <snmp_mgr_port>
Port number of SNMP manager. Range is from 1 to 65535.
-c <snmp_mgr_community_name>
Community name of SNMP manager.
-u <snmp_mgr_user_name>
User name of SNMP manager.
-a <snmp_mgr_access_type>
Access type of SNMP manager.
Up to 8 SNMP managers can be set.
Range is from 0 to 7.
Maximum of 255 characters.
Maximum of 60 characters.
Available when SNMP version is v1/v2c.
From 1 to 32 characters.
Available when SNMP version is v3.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-273