Hitachi Compute Blade 500 Series User Manual page 237

Port number
Port number of protocol.
Range is from 1 to 65535.
Allow
IPv4 connection permission
allow: IPv4 connections are permitted.
deny: IPv4 connections are prohibited.
Network address
Network address
If there is a limit on the IPv4 addresses from which HTTP connections
are permitted, the network address indicating the range of permitted
IPv4 addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "0.0.0.0" is displayed.
Subnetmask
Subnet mask
If there is a limit on the IPv4 addresses from which HTTP connections
are permitted, the subnet mask indicating the range of permitted IPv4
addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "0.0.0.0" is displayed.
-- HTTP setting (IPv6) --
Allow
IPv6 connection permission
allow: IPv6 connections are permitted.
deny: IPv6 connections are prohibited.
Network address
Network address
If there is a limit on the IPv6 addresses from which HTTP connections
are permitted, the network address indicating the range of permitted
IPv6 addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "::" is displayed.
Prefix len
Prefix length
To limit the IPv6 addresses from which HTTP connections are
permitted, specify the prefix length that indicates the range of IPv6
addresses to be permitted.
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-219