Power Supply; Show Power Setting - Hitachi Compute Blade 500 Series User Manual

Comment
None

Power supply

show power setting

Command
show power setting
Description
Shows the following power capacity expansion settings and power capping
setting for a server blade.
• Power capacity expansion setting
• DCMI mode
• Emergency power control (EPC)
• Accurate power control (APC)
• Order of blade to power off
In SMP configuration, when you specify the primary server blade, power
capping settings for all server blades are shown. When you specify a non-
primary server blade, the setting value is shown in parentheses and will not
affect the non-primary server blade operation.
Role
Chassis
Parameters
None
Show items
-- Power setting --
Power capacity expansion setting.
enable : power capacity expansion feature is enable.
disable : power capacity expansion feature is disable.
DCMI mode
DCMI mode
enable : Enabled. (DCMI mode)
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-195