Set Security Strength - Hitachi Compute Blade 500 Series User Manual

Slot
Security strength : high
-- Server blade security setting --
Slot
Security strength : high
-- Server blade security setting --
Slot
Security strength : high
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

set security strength

Command
set security strength [-m] [-b <blade_no>] -s <security_strength>
[-F]
Description
Sets security strength to management modules and server blades.
Setting security strength to a management module will restart the
management module.
Specifying -m sets security strength to a management module. Specifying -b,
sets security strength to a server blade. You can specify -m and -b at the
same time. With -b specified, select a target server blade number, multiple
server blade numbers, or all. When both -m and -b are omitted, nothing is
set.
Sets Security strength on each specified server blade regardless of whether
the server blade is in SMP configuration or not.
Role
Chassis
Parameters
-m
Management module
Sets security strength to management modules.
-b<blade_no>
Server blade number
Selects a server blade number to set security strength.
: 5
: 6
: 7 (not install)
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-325