Hitachi Compute Blade 500 Series User Manual page 122

Show items
-- Switch module status --
Slot
Switch module number
Install
Whether the module is installed
Power
Power supply status
Booting
Booting status
Fail
Failure status
Warning
Warning status
2-104
Range is from 0 to 3.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
Range is from 0 to 3.
Displays the installation status of the switch module.
installed: The switch module is installed.
not installed: The switch module is not installed.
Displays the power supply status.
on: The switch module is powered on.
off: The switch module is powered off.
-----: The switch module is not installed.
Displays whether the switch module is currently being initialized.
on: The switch module is currently being initialized.
off: The switch module is not being initialized.
-----: The switch module is not installed.
Displays whether a failure occurred on the switch module.
normal: The status of the switch module is normal.
fail: A failure occurred on the switch module. Check the details of the
failure in the system event log.
-----: The switch module is not installed.
Displays whether a warning was issued for the switch module.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide