Hitachi Compute Blade 500 Series User Manual page 69

Parameters
<blade_no>
Slot number of server blade in the server chassis
Range is from 0 to 7.
Multiple selection is not available.
-b <hvm_bank_no>
Assign bank number of LP firmware to the server blade.
Range is from 0 to 3.
-d
Assignment of the LP firmware of the server blade is canceled.
-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[Assign the LP firmware of bank 0 to the server blade 0.]
$ assign blade hvm firmware 0 -b 0
Confirm? (y/[n]):y
I0037 : <Blade 0> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
[Assignment of the LP firmware of the server blade 0 is canceled.]
$ assign blade hvm firmware 0 -d
Confirm? (y/[n]):y
I0037 : <Blade 0> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-51