Hitachi Compute Blade 500 Series User Manual page 190

of the system language. When Follows the system settings is selected, a
system language set in
used.
japanese: Japanese
english: English
system: Follows the system settings
When this item is omitted, the language is not modified.
-c <cli_prompt>
Modifies a method of prompt on the CLI console, $ (fixed) or chassis
ID(slot number for a management module)$. Displaying chassis ID at the
prompt enables to specify a currently used system unit when you manage
multiple system units using CLI.
$: fixed
Chassis ID(slot number for management module)$
When this item is omitted, CLI console prompt is not modified.
-t <logout_time>: Session timeout in minutes
Modifies time in minutes for automatically logout due to no operation on
the CLI console. The session timeout ranges from 0 to 1440 minutes.
When 0 is specified, the session cannot be disconnected automatically.
Web console, however, is disconnected from a session after 30 minutes
passed regardless of this setting value.
0: Automatic logout is not performed.
1 to 1440: Time until a session timeout automatically end the session in
the inactive state. When this item is omitted, the session timeout is not
modified.
-p <password>
Sets a password for login using up to 31 characters.
This item is not included in the account information. Store your password
in a safe place. When this item is omitted, the password is not modified.
-e <expired_login>
Changing the expired password
-F
No confirmation dialog box appears before the command execution.
Show items
None
2-172
Specifies the event that occurs when a user attempts to login by using
an expired password. You can enable this setting even if the password
has already expired.
enable : The user can change the expired password and then log in.
disable : The user cannot log in.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
set language system on page 2-151 command is