Show Sw-Module Firmware - Hitachi Compute Blade 500 Series User Manual

The name and value of the temperature sensor for the switch module are
displayed.
Depending on the type of the switch module, this is displayed only if the
temperature sensor exists.
-- Volt --
The name and the value of the voltage sensor for the switch module are
displayed.
Depending on the type of the switch module, this is displayed only if the
voltage sensor exists.
-- Ampere --
The name and the value of the electric current sensor for the switch
module are displayed.
Depending on the type of the switch module, this is displayed only if the
electric current sensor exists.
Message
None
Example
[To display the firmware information for switch module 0.]
$ show sw-module hardware 0 -h
-- Switch module hardware information --
Slot
-- Switch module --
Product name
module
Model name
Serial number
Nameplate power [W]
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

show sw-module firmware

Command
show sw-module firmware [<sw_no>]
Description
Displays the firmware versions of switch modules.
The following items are displayed:
2-108
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
: 0
: Hitachi 1/10Gb LAN switch
: GV-BE2LSW2X1-Y
: 002222
: 26