Hitachi Compute Blade 500 Series User Manual page 29

Num
Slot number of card
Mezzanine: 1 to 4.
Onboard LAN: 1 to 2
Port
Port number of card
World wide port name
WWPN
XX:XX:XX:XX:XX:XX:XX:XX : Default Physical WWN or Optional
Physical WWN
World wide node name
WWNN
XX:XX:XX:XX:XX:XX:XX:XX : Default Physical WWN or Optional
Physical WWN
Message
None
Example
[Displays WWN which the card installed on server blade 0 is using.]
$ show wwn current -b 0
-- Current WWN List --
Slot
WWN type
Card Num Port World wide port name
name
----------- --- ---- ------------------------
------------------------
mezzanine 2
24:00:00:00:87:00:01:49
mezzanine 2
24:00:00:00:87:00:01:4b
mezzanine 2
24:00:00:00:87:00:01:4d
mezzanine 2
24:00:00:00:87:00:01:4f
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
When you specify -p parameter and a non-primary server blade in SMP
configuration, the following message appears without showing WWN.
Hitachi Compute Blade 500 Series CLI Console User's Guide
: 0
: additional
0 24:00:00:00:87:00:01:48
1 24:00:00:00:87:00:01:4a
2 24:00:00:00:87:00:01:4c
3 24:00:00:00:87:00:01:4e
CLI command
World wide node
2-11