Set Blade Bmc Account - Hitachi Compute Blade 500 Series User Manual

Confirm? (y/[n]):y
I0037 : <Blade 1> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
[To disable the static address for the management LAN settings (IPv6) for
Server Blade 2]
$ set blade mgmt-v6 address 2 -st disable
Confirm? (y/[n]):y
I0037 : <Blade 2> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
Checking the specified address
The static address and the IPv6 address specified for the default gateway
are configured only if they are determined to be valid based on the format
check. (For more information about the format check, see
and Display the IP Address on page
For more information on specifying IPv6 addresses, see
and Display the IP Address on page

set blade bmc account

Command
set blade bmc account <blade_no> -a <account_no> [-u
<account_use>] [-n <user_name>] [-p <password>] [-F]
Description
Sets a BMC user account for a server blade. A BMC user account number
from 1 to 4 can be set.
This sets BMC user accounts for the specified server blade, even in an SMP
configuration.
Set the following items:
• Enabled or disabled BMC User account
• User name
• Password
Role
Server Blade
2-84
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-4.)
How to Specify
2-4.
How to Specify