Hitachi Compute Blade 500 Series User Manual page 242

Show items
-- SSH setting --
Allow
IPv4 connection permission
Network address
Network address
Subnetmask
Subnet mask
-- SSH setting (IPv6) --
Allow
IPv6 connection permission
Network address
Network address
Prefix len
Prefix length
2-224
allow: IPv4 connections are permitted.
deny: IPv4 connections are prohibited.
If there is a limit on the IPv4 addresses from which SSH connections
are permitted, the network address indicating the range of permitted
IPv4 addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "0.0.0.0" is displayed.
If there is a limit on the IPv4 addresses from which SSH connections
are permitted, the subnet mask indicating the range of permitted IPv4
addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "0.0.0.0" is displayed.
allow: IPv6 connections are permitted.
deny: IPv6 connections are prohibited.
If there is a limit on the IPv6 addresses from which SSH connections
are permitted, the network address indicating the range of permitted
IPv6 addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "::" is displayed.
To limit the IPv6 addresses from which SSH connections are
permitted, specify the prefix length that indicates the range of IPv6
addresses to be permitted.
If you do not want to limit the addresses from which connections are
permitted, specify "0".
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide