Show Blade Hvm Setting - Hitachi Compute Blade 500 Series User Manual

IP address
-s <subnet_mask>
Subnet mask
-g <default_gateway>
Default gateway of module
-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[Set IP address, subnet mask, and default gateway of the management LAN
of BMC in the server blade 0.]
$ set blade mgmt-lan 0 -i 192.168.0.50 -s 255.255.255.0 -g
192.168.0.1
W0003 : Session may be disconnected when setting saved.
Confirm? (y/[n]):y
I0037 : <Blade 0> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
[Edit IP address of management LAN of BMC on server blade 0.]
$ set blade mgmt-lan 0 -i 192.168.0.60
W0003 : Session may be disconnected when setting saved.
Confirm? (y/[n]):y
I0037 : <Blade 0> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

show blade hvm setting

Command
show blade hvm setting [<blade_no>][-p] [-v]
2-46
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide