Hitachi Compute Blade 500 Series User Manual page 77

Parameters
<blade_no>
Slot number of the server blade in the server chassis
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
-h
Hard reset the blade.
If omitted -h and -s parameter, this parameter is applied.
-s
Issues NMI (Non-Maskable Interrupt).
-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[Reset server blade 0.]
$ reset blade 0
Confirm? (y/[n]):y
I0032 : <Blade 0> Reset was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
[NMI is sent to all the server blades.]
$ reset blade all -s
Confirm? (y/[n]):y
I0032 : <Blade 0> Reset was completed.
I0032 : <Blade 1> Reset was completed.
I0032 : <Blade 2> Reset was completed.
I0032 : <Blade 3> Reset was completed.
I0032 : <Blade 4> Reset was completed.
I0032 : <Blade 5> Reset was completed.
I0032 : <Blade 6> Reset was completed.
I0032 : <Blade 7> Reset was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-59