Show Blade Firmware - Hitachi Compute Blade 500 Series User Manual

$ clear blade hvm 0
Confirm? (y/[n]):y
I0039 : <Blade 0> HVM setting was cleared.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

show blade firmware

Command
show blade firmware [<blade_no>] [-b]
Description
Shows the following firmware versions on a server blade.
• Server blade firmware version
• BMC version
• EFI version
• LP version
• Bank number of LP firmware version
Each item shows the current version and a version to be used at the next
boot.
The current LP firmware version is shown only when LP firmware is assigned
to the server blade with the OS in LP mode. The version to be used at the
next boot is shown when LP firmware is assigned to the server blade.
Server blade firmware version, BMC version, EFI version:
Firmware version on a specified server blade is shown regardless of
whether the server blade is in SMP configuration or not.
LP firmware version, LP firmware bank number
When you specify the primary server blade in SMP configuration, LP
firmware used in SMP configuration is shown. When you specify a non-
primary server blade, the setting value is shown in parentheses, which
does not affect the operation. Non-primary server blades operate with the
primary server blade LP firmware.
Role
Server Blade
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-61