Hitachi Compute Blade 500 Series User Manual page 254

set bsm server -n <bsm_name> -i <bsm_ip_addr> [-ap
<bsm_alert_port>] [-al <bsm_alert_level>] [-ai
<bsm_alert_interval>] [-at <bsm_alert_duration>] [-F]
[Change the setting of bsm server which is already registered]
set bsm server -n <bsm_name> [-i <bsm_ip_addr>] [-ap
<bsm_alert_port>] [-al <bsm_alert_level>] [-ai
<bsm_alert_interval>] [-at <bsm_alert_duration>] [-F]
Description
Sets the information on ServerConductor/Blade Server Manager server.
Update the information when the server name is already registered, and adds
the server when its server name server is not registered. Up to 4 servers can
be registered.
Role
Chassis
Parameters
-n <bsm_name>
Server name
-i <bsm_ip_addr>
IP address
-ap <bsm_alert_port>
Alert port
-al <bsm_alert_level>
Alert level
2-236
The name of ServerConductor/Blade Server Manager server
15 characters at the maximum can be used for the name.
The IP address of ServerConductor/Blade Server Manager server.
(required when adding server)
The port number to notify an alert to ServerConductor/Blade Server
Manager server. Range is from 1 to 65535.
If omitted when adding a server, 20079 is set. If omitted when
updating, the value doesn't change.
Alert level notified to ServerConductor/Blade Server Manager
all : Notify all level of alerts, which includes Failure, Warning and
Information.
disable : Notify no alert
alert : Notify alert of Failure or Warning
information : Notify alert of Information.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide