Hitachi Compute Blade 500 Series User Manual page 187

Role
Account
Parameters
-i <user_id>
Specify an account name. You can use a maximum of 31 alphanumeric
characters, hyphens (-), periods (.), and underscores (_). You can specify
only an alphanumeric character for the first character. You cannot omit
this parameter.
-s <status>
Sets the account is enabled or disabled.
enable: the account user can log in.
disable: the account user cannot log in.
When this item is omitted, enable is set.
-r <role_id>
Sets a role name using up to 31 alphabetical characters.
This item is not omitted.
-l <language>
Sets a language used when you log in with this account, which is selected
from English, Japanese, and Follows the system settings. When English or
Japanese is selected, the selected language is used regardless of the
system language. When Follows the system settings is selected, a system
language set in set language system on page 2-151
japanese: Japanese
english: English
system: Follows the system settings
-c <cli_prompt>
Sets a method of prompt on the CLI console, $ (fixed) or chassis ID (slot
number for a management module)$. Displaying chassis ID at the prompt
enables to specify a currently used system unit when you manage
multiple system units using CLI.
$: fixed
chassis: Chassis ID(slot number for management module)$
When this item is omitted, Chassis ID(slot number for management
module)$ is set.
-t <logout_time>: Session timeout in minutes
Sets time in minutes for automatically logout due to no operation on the
CLI console. The session timeout ranges from 0 to 1440 minutes. When 0
is specified, the session cannot be disconnected automatically. Web
console, however, is disconnected from a session after 30 minutes passed
regardless of this setting value.
0: Automatic logout is not performed.
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
command is used.
2-169