Show Blade Mgmt-Lan - Hitachi Compute Blade 500 Series User Manual

If the message appears when server blade is turned off, contact your reseller
or maintenance personnel.

show blade mgmt-lan

Command
show blade mgmt-lan [<blade_no>]
Description
Shows the following items of a server blade management LAN.
• IP address
• Subnetmask
• Default gateway
Shows management LAN setting items of a specified server blade regardless
of whether the server blade is in SMP configuration or not.
Role
Network
Parameters
<blade_no>
Slot number of server blade in the server chassis.
Show items
-- Blade LAN interface setting --
Slot
Slot number of server blade in the server chassis.
IP address
IP address
Subnetmask
Subnet mask
Default gateway
Default gateway of the module
2-44
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
Range is from 0 to 7.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide