Hitachi Compute Blade 500 Series User Manual page 150

Status
Status
IP address
IP address (IPv6)
Prefix len
Prefix length
Default gateway
Default gateway (IPv6)
-- Link local address DAD setting --
Action DAD fails
Whether to enable or disable IPv6 communication suppression when
duplicated link local addresses are detected (appears when the -ld
parameter is specified)
disabling IPv6 operation: Suppress IPv6 communication.
not disabling IPv6 operation: Do not suppress IPv6 communication.
-- IPv6 Operation --
IPv6 Operation
Status of IPv6 communication (appears when the -ld parameter is
specified)
enable: IPv6 communication is enabled.
disable: IPv6 communication is suppressed if duplicated link local
addresses are detected.
-- Management module DNS setting --
Priority
Priority
2-132
Link local address: The link local address of the primary management
module (appears when the -ld parameter is specified)
Whether the address settings are enabled
enable: Enabled.
disable: Disabled.
----- : When the address setting is disabled
This is a value from 1 to 128.
----- : When the address setting is disabled
----- : When the address setting or the default gateway is disabled
Displays whether to access IPv4 DNS servers first or to access IPv6
DNS servers first.
IPv4: IPv4 DNS servers have higher priority.
IPv6: IPv6 DNS servers have higher priority.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide