Server Blade; Show Blade Setting - Hitachi Compute Blade 500 Series User Manual

Example
[Sets enabled the LCD touch console.]
$ set lcd validity -v enable
Confirm? (y/[n]):y
I0001 : Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

Server blade

show blade setting

Command
show blade setting [<blade_no>]
Description
Shows the following setting items of server blades.
• Blade AC recovery
• Wait time for AC recovery
• N+M cold standby
• WWN type
• MAC type
• OS operating mode
In SMP configuration, when you specify the primary server blade, settings for
all server blades are shown. When you specify a non-primary server blade,
the setting values, shown in parentheses, will not affect the non-primary
server blade. Non-primary server blades operate with the primary server
blade settings.
Role
Server Blade
Parameters
<blade_no>
Slot number of the server blade in the server chassis
Range is from 0 to 7.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-25