Show Log Power - Hitachi Compute Blade 500 Series User Manual

Switch module: The Equipment Parameter for a proper switch
module does not exist.
00000044 2014-10-02 23:45:05 FAIL
FF00000000000000
Switch module: The Equipment Parameter for a proper switch
module does not exist.
00000045 2014-10-02 23:45:05 FAIL
FF00000000000000
Switch module: The Equipment Parameter for a proper switch
module does not exist.
00000046 2014-10-02 23:45:05 FAIL
FF00000000000000
Switch module: The Equipment Parameter for a proper switch
module does not exist.
(Omission)
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

show log power

Command
show log power -m <log_power_module> -b <blade_no> [-t
<log_power_trend>] [-F]
Description
Shows the following power monitoring logs for the server chassis and server
blade.
For server chassis
- Date and time of chassis power status logs
- Moving average value for electric power consumption (AC) for the past
three minutes
- Highest value for electric power consumption (AC) within the past three
minutes
- Lowest value for electric power consumption (AC) within the past three
minutes
- Integrated value for electric power consumption (AC) for the past three
minutes
- Moving average value for electric power consumption (DC) for the past
three minutes
- Upper limit of electric power consumption set by the APC
- Highest value for the upper limit of electric power consumption set by
the APC within the past three minutes
2-284
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
SW2
0044 02 81E32D54 6100 04 F2F8 07A33712
SW3
0045 02 81E32D54 6100 04 F2F8 07A33713
SW2
0046 02 81E32D54 6100 04 F2F8 07A33712