Set Sw-Module Mgmt-Lan - Hitachi Compute Blade 500 Series User Manual

Subnetmask
Subnet mask.
Default gateway
Default gateway of module.
Setting default gateway to LAN switch
Setting for default gateway to be applied to the internal LAN switch
module
This setting is for keeping compatibility with management module
firmware A0125 or earlier.
Message
None
Example
[Shows the management LAN of switch module 0.]
$ show sw-module mgmt-lan 0
-- Switch module management LAN setting --
Slot
Connection type : mgmt
Mgmt port
IP address
Subnetmask
Default gateway : 192.168.0.1
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

set sw-module mgmt-lan

Command
set sw-module mgmt-lan <sw_no> -e <sw_connect> [-i <ip_addr>] [-s
<subnet_mask>] [-g <default_gateway>] [-w <dgw_to_lansw>] [-F]
Description
Edits management LAN of switch module.
Role
Network
enable: Applies the default gateway to the LAN switch module.
disable: Not applies the default gateway to the LAN switch module.
: 0
: 0
: 192.168.0.10
: 255.255.255.0
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-97