D.Under carriage
a. Swivel bearing
(1)Assembly sketch of swivel bearing (K008-3)
Attach the mark "S" to the right side of the
track frame. (Front rotary lock hole side)
Set the screw hole the grease nipple to the
right side of the rotary frame.
Apply grease the whole surface of the teeth.
(DYNAMAX EP-2 or equivalent)
Assembly procedure
1) Set the screw hole the grease nipple to the right
side and attach the stamp mark "S" to the right
side.
Bolt tightening torque:
107~117.7N·m (10.5~12 kgf·m)
2) Apply and inject grease to the surface of teeth
and between balls. (DYNAMAX EP-2 or equiva-
lent)
II-S-39
Courtesy of Machine.Market