Greasing The Pilot Valve Linkage; Checking The Electric Cables And Connections - Kubota U17-3a Operating Instructions Manual

Greasing the pilot valve linkage


Pull up the rubber boot on the control lever (3).

Lubricate the u-joint (1) below the plate (2) with grease. See
the "Recommended lubricants" section (page 105).

Insert the rubber boot in the console.

Carry out the service for the second control lever.

Checking the electric cables and connections


Check all accessible electric cables, connectors and connections for condition and security.

Repair or replace damaged parts.

Check the fuse box and fuse holders for oxidation and dirt, clean if necessary.
102
Maintenance