Water Drainage From Fuel Tank - Kubota XN12-8 Operation Manual

Maintenance
Every 50h
1. Stop the machine as per the posture shown
in above diagram and stop the engine.
2. Lubricate the grease fitting (1) by a grease
gun.
3. Start the engine, lift the bucket, and rotate
clockwise for 90°.
4. Lower the bucket onto the ground and then
stop the engine.
5. Repeat above steps 2~4 for 3 times.
6. Wipe away the grease drained from the
slewing bearing and grease pipe.

Water drainage from fuel tank

● Do not smoke or use open fire while
handling fuel or performing the
operations of fuel system.
● Do not disassemble the fuel tank cap or
refuel while the engine is running or is
not cooled down. Do not splash fuel to
any high temperature surface of
machine.
● Refuel the fuel tank in a well-ventilated
place.
● Do not top up the fuel tank. Leave an
expansion space for the fuel.
● Any overflown fuel shall be wiped away
immediately.
● Tighten the fuel tank cap securely.
● Use correct fuel grade based on the
season.
5-27
Warning