Setting Up The Workplace; Adjusting The Operator's Seat - Kubota U17-3a Operating Instructions Manual

Operation

Setting up the workplace

Adjusting the operator's seat

Adjust the operator's seat so that fatigue-free and comfortable working is possible. It should be pos-
sible to operate all controls safely.
Horizontal seat adjustment (seat stand-off)
Pull the horizontal seat adjustment lever (1) up and move the
seat to the desired position by moving it forward or back, then
release the lever.
Check that the seat is locked in place.
STOP
Spring adjustment (operator's weight)
The seat can be set to the weight of the operator using the lever (1).
Sit down on the operator's seat.
Turning the toggle towards "+" increases the spring tension
(heavier operator), while turning the toggle towards "-" reduces
the spring tension (lighter operator).
Adjust the seat so that a comfortable cushioning is
achieved.
Backrest adjustment
To set the desired backrest position, turn the toggle (2). The backrest should be adjusted so that the operator can
safely operate the control levers with the back resting completely on the backrest.
W9232-8135-6
12/2015
1
1
2
63