Adjusting The Operator's Seat; Lock Lever - Kubota KX080-3 Operator's Manual

BAdjusting the Operator's Seat
To avoid personal injury:
A Make sure that the seat is completely secured
after each adjustment.
(1) Backrest tilt adjust lever
(2) Arm rest angle adjust knob
(3) Weight adjust lever
(4) Weight adjustment indicator
(5) Travel adjust lever
(6) Arm rest
C Travel adjustment
Pull the travel adjust lever in the direction of [A] and
slide the seat backward or forward, as required. The
seat will lock in position when the lever is released.
C Weight adjustment
Turn the weight adjust lever to achieve the optimum
suspension setting.
C Tilt adjustment
Pull the backrest tilt adjust lever in the direction of [A]
and move the backrest to the desired angle.
C Height adjustment
Lift the seat to the desired height of the three available
positions. Adjust the seat to the desired position after
lifting the seat to the highest position in the case of
lowering the seat.
C Arm rest
Arm rest may be set at upright position if desired.
(A) "UNLOCK"
(B) "TO INCREASE TENSION"
(C) "TO DECREASE TENSION"
(D) "TO INCREASE ANGLE"
(E) "TO DECREASE ANGLE"
EXCAVATOR OPERATION
C Arm rest angle adjustment
Turn the arm rest angle adjust knob to the desired
angle.
BLock Lever
To avoid personal injury:
A To avoid injuries, check safety aspects all
around the excavator.
A With the lever lock pulled down, the engine fails to
start.
If you try to start the engine with the key with the lock lever
down, the following message appears momentarily on the
meter display.
(1) Lock lever (Unload lever)
23
(A) "Unlock"