DataBar Expanded Enable
NOTE
352
Enables/disables the ability of the scanner to decode DataBar
Expanded labels.
This value-added feature is a factory-programmed option. Contact
your dealer for information about upgrading your system to include
this advanced capability.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
DataBar Expanded = DISABLE
DataBar Expanded = ENABLE
Magellan™ 8300/8400