Igmp Static Groups; Figure 35: L2 Switching > Multicast > Igmp Snooping > Igmp Querier; Figure 36: L2 Switching > Multicast > Igmp Snooping > Igmp Static Groups; Table 32: Igmp Querier - Allied Telesis IS230-10GP Web User Manual

To access this page, click L2 Switching > Multicast > IGMP Snooping >
IGMP Querier.
Figure 35. L2 Switching > Multicast > IGMP Snooping > IGMP Querier
The following table describes the items in Figure 35.
Item Description
VLAN ID Select the VLAN ID to define the local IGMP querier.
Querier State Select Disable or Enable to configure the VLAN ID (IGMP Querier).
Querier Version Select the querier version (V2 or V3) designated to the selected VLAN
ID.
Apply Click Apply to save the values and update the screen.
The IGMP Querier Status settings in the ensuing table are informational
only: VLAN ID, Querier State, Querier Status, Querier Version and Querier
IP.

IGMP Static Groups

To access this page, click L2 Switching > Multicast > IGMP Snooping >
IGMP Static Groups.
Figure 36. L2 Switching > Multicast > IGMP Snooping > IGMP Static
The following table describes the items in Figure 36.
Item Description
VLAN ID Select the VLAN ID to define IGMP static group.
IS230-10GP Industrial layer 2 Switch Web User Guide
Table 32. IGMP Querier
Groups
Table 33. IGMP Static Groups
61